Showing all 46 resultsSorted by popularity
GOUGE-CIRCULAR 2 [G2/01A]
BELT-VS [G2/10E]
HANDLE-SPIN #13B
CENTER-SPUR #4MT-1-1/4 [G2/16B]
CENTER-CUP #4MT 3/4IN [G2/16B1]
HANDWHEEL-FACEPLATE 1-1/8X8 LH THD [G2/02B]
STUD-CLAMP [G2/02D2]
HUB – FACE PLATE 1-1/8” X 8TPI
[G2/04B]
FACE PLATE 3IN PLATE ONLY HUB SOLD SEPARATELY [G2/17C22]
FACE PLATE 6IN PLATE ONLY HUB SOLD SEPARATELY [G2/17C22]
REST-STRAIGHT #159 18IN-1-1/2IN SHANK [G2/14D]
REST-STRAIGHT #157 [G2/02A]
REST-STRAIGHT #137 12IN-1IN SHANK [G2/02A]
KNOB #150, #W4 [G2/25A5]
HANDLE #5H CI [G2/05B]
HANDLE-SPIN #17B [G2/07A1]
FACEPLATE- 8IN [G2/02D]
FACEPLATE-LATHE 4-IN 1-1/8X8 THD [G2/02A]
FACEPLATE #200 3IN 1-1/8-8 RH THD [G2/15E1]
CHUCK-ROSETTE #10 [G2/16C]
CHUCK-ROSETTE #6 2.25″ 1-1/8X8 THD [G2/02A]
CENTER-SPUR #4MT 2IN [G2/02B]
CENTER-SPUR #2 1 [G2/10B]
CENTER-SPUR #2, 3/4 [G2/10B]
CENTER 1-1/4’IN #2MT [G2/02A]
HANDWHEEL 5’IN CI [G2/07C1]
SLIDE-TOOL POST CI [G2/51A]
SLIDE CI [G2/03A]
KNOB-DRUM SWITCH [G2/04A]
BELT-VS [G2/29E]
BELT-VS [G2/29]
WASHER [G2/09B2]
POINT-CUP [G2/02A]
BRACKET [G2/10C1]
DISK-LOCK CI [G2/06C]
RING-RETAINING [G2/06A3]
CUP-POINT [G2/10B5]
SLIDE-CARRIAGE [G2/09D]
NUT-CLAMP [G2/07A1]
CLAMP-TAILSTOCK [G2/02A]
PIN-HOLDING [G2/02A]
ADAPTOR-LUBE FITTING [G2/07A1]
DISK-MOTOR .625 BORE CI
ACTUATOR-SWITCH [G2/10C2]
ROLLER-SLEEVE [G2/25A4]
WASHER-RETAINING
Select at least 2 productsto compare
![GOUGE-CIRCULAR 2
[G2/01A]](https://straitoplane.com/wp-content/uploads/2024/02/0020-0214-300x300.jpg)
![BELT-VS
[G2/10E]](https://straitoplane.com/wp-content/uploads/2024/02/5601-2345-300x300.jpg)
![CENTER-SPUR
#4MT-1-1/4
[G2/16B]](https://straitoplane.com/wp-content/uploads/2024/03/4095-0504-4001-300x300.jpg)
![CENTER-CUP #4MT 3/4IN
[G2/16B1]](https://straitoplane.com/wp-content/uploads/2024/03/4095-0304-2401-300x300.jpg)
![STUD-CLAMP
[G2/02D2]](https://straitoplane.com/wp-content/uploads/2024/02/0159-0072-300x300.jpg)
![REST-STRAIGHT #159
18IN-1-1/2IN SHANK
[G2/14D]](https://straitoplane.com/wp-content/uploads/2024/03/4520-1618-1002-300x300.jpg)
![FACEPLATE #200
3IN 1-1/8-8 RH THD
[G2/15E1]](https://straitoplane.com/wp-content/uploads/2024/03/4225-0101-0301-300x300.jpg)
![CHUCK-ROSETTE #10
[G2/16C]](https://straitoplane.com/wp-content/uploads/2024/03/4115-0201-0301-300x300.jpg)
